参考文献/References:
[1] 李峰,王栋,郭宏超,等.不同类型钢板剪力墙抗震性能的数值模拟[J].世界地震工程,2011,27(4): 27 — 32.
LI Feng, WANG Dong, GUO Hongchao, et al. Numerical simulation of seismic performance for different types of steel plate shear walls[J]. World Earthquake Engineering, 2011, 27(4): 27 — 32.(in Chinese)
[2] AISC 341-10. Seismic provisions for structural steel buildings[S]. American Institute of Steel Construction, 2010.
[3] 程满, 闻广坤. 钢结构抗侧力体系抗震性能对比[J]. 世界地震工程, 2017, 33(1): 244 — 251.
CHENG Man, WEN Guangkun. Seismic behavior comparison of lateral force resisting system of steel structure[J]. World Earthquake Engineering, 2017, 33(1): 244 — 251.(in Chinese)
[4] PAVIR A, SHEKASTEHBAND B. Hysteretic behavior of coupled steel plate shear walls[J]. Journal of Constructional Steel Research, 2017, 133: 19 — 35.
[5] SAFARI GORJI M, CHENG J J R. Plastic analysis and performance-based design of coupled steel plate shear walls[J]. Engineering Structures, 2018, 166: 472 — 484.
[6] 吴博睿,郝际平,田炜烽,等.基于耦联比的联肢钢板剪力墙滞回性能分析[J].钢结构(中英文),2020,35(12): 36 — 42.
WU Borui, HAO Jiping, TIAN Weifeng, et al. Research on hysteretic behaviour of coupled steel plate shear wall structures based on coupling ratio[J]. Steel Construction(Chinese & English), 2020, 35(12): 36 — 42.(in Chinese)
[7] 谭智诚,陈麟,吴轶.不同耦联比的钢框架-联肢钢板墙抗震性能分析[J].钢结构(中英文),2021,36(07): 9 — 17.
TAN Zhicheng, CHEN Lin, WU Yi. Seismic performance of steel frame-coupled steel plate shear wall structures with different coupling ratio[J]. Steel Construction(Chinese & English), 2021, 36(7): 9 — 17.(in Chinese)
[8] 马尤苏夫,杨烊,张淑云,等.不同连梁节点构造的联肢钢板剪力墙结构抗震性能试验研究[J].建筑结构学报,2021,42(10): 45 — 56.
MA Yousufu, YANG Yang, ZHANG Shuyun, et al. Experimental study on seismic behavior of coupled steel plate shear wall structures with different coupling beam-to-column joints[J]. Journal of Building Structures, 2021, 42(10): 45 — 56.(in Chinese)
[9] 马尤苏夫, 崔聪, 周清汉, 等. 联肢加劲钢板剪力墙滞回性能试验研究与数值分析[J]. 工程力学, 2021, 38(9): 212 — 227.
MA Yousufu, CUI Cong, ZHOU Qinghan, et al. Experimental study and numerical analysis on hysteresis behavior of coupled steel plate shear walls with stiffeners[J]. Engineering Mechanics, 2021, 38(9): 212 — 227.(in Chinese)
[10] GB 50011—2010 建筑抗震设计规范[S]. 北京: 中国建筑工业出版社, 2010.
GB 50011—2010 Code for Seismic Design of Buildings[S]. Beijing: China Architecture & Building Press, 2010.(in Chinese)
[11] 张文强, 郝际平, 解琦, 等. 半刚接框架-非加劲钢板墙体系抗震试验研究[J]. 世界地震工程, 2010, 26(4): 107 — 113.
ZHANG Wenqiang, HAO Jiping, XIE Qi, et al. Experimental study on seismic behavior of semi-rigid steel frame—non-stiffened thin steel plate shear wall structure[J]. World Earthquake Engineering, 2010, 26(4): 107 — 113.(in Chinese)
[12] 解琦, 郝际平, 张文强. 平齐端板连接半刚性框架-十字加劲钢板剪力墙抗震性能试验研究[J]. 世界地震工程, 2015, 31(1): 139 — 143.
XIE Qi, HAO Jiping, ZHANG Wenqiang. Experimental study on seismic performance of semi-rigid frame and cross stiffened steel plate shear wall with flush-end plate connections[J]. World Earthquake Engineering, 2015, 31(1): 139 — 143.(in Chinese)
[13] M SAFAR GORJI. Design of Steel Plate Shear Wall Systems With Explicit Consideration of Drift Demands and Frame Action[D]. Canada: University of Alberta, 2017.
[14] 郝际平, 袁昌鲁, 樊春雷, 等. 钢板剪力墙结构基于性能的塑性设计方法研究[J]. 工程力学, 2015, 32(7): 118 — 127.
HAO Jiping, YUAN Changlu, FAN Chunlei, et al. Performance-based plastic design method for the slender unstiffened steel plate shear walls[J]. Engineering Mechanics, 2015, 32(7): 118 — 127.(in Chinese)
[15] 伍云天, 代崇民, 周忠亮, 等. 剪切机制耗能端板螺栓连接组合联肢剪力墙钢连梁抗震性能试验研究[J]. 建筑结构学报, 2014, 35(4): 255 — 261.
WU Yuntian, DAI Chongmin, ZHOU Zhongliang, et al. Seismic behavior of shear dominant bolted endplate steel coupling beam of composite coupled shear wall[J]. Journal of Building Structures, 2014, 35(4): 255 — 261.(in Chinese)
[16] 秋山宏. 基于能量平衡的建筑结构抗震设计[M]. 北京: 清华大学出版社, 2010.
QIU Shanhong. Seismic Design of Building Based on Energy Balance[M]. Beijing: Tsinghua University Press, 2010.(in Chinese)
[17] LEELATAVIWAT S, GOEL S C, STOJADINOVIC' B C. Toward performance-based seismic design of structures[J]. Earthquake Spectra, 1999, 15(3): 435 — 461.
[18] 白久林. 钢筋混凝土框架结构地震主要失效模式分析与优化[D]. 哈尔滨: 哈尔滨工业大学, 2015.
BAI Jiulin. Main Seismic Failure Mode Analyses and Optimization of Reinforced Concrete Frame Structures[D]. Harbin: Harbin Institute of Technology, 2015.(in Chinese)
[19] GOEL S, CHAO S H. Performance-based plastic design—earthquake resistant steel structures[M]. International Code Council, 2008.
[20] AKIYAMA H. Earthquake-resistant limit-state design for buildings[M]. Tokyo: University of Tokyo Press, 1985.
[21] Uniform Building Code. UBC97 Structural Engineering Design Provision[S]. 1997.
[22] HOUSNER G W. Limit design of structures to resist earthquake[C]. Proceedings of the 1st World Conference on Earthquake Engineering, Earthquake Engineering Research Institute, Oakland, Calif., 1956, 5: 1 — 13.
[23] CHAO S H, GOEL S C, LEE S S. A seismic design lateral force distribution based on inelastic state of structures[J]. Earthquake Spectra, 2007, 23(3): 547 — 569.
[24] ZHANG B, WU Y T, ZHOU Q, et al. Energy-balance based plastic design and analysis of hybrid coupled wall system[J]. Structures, 2021, 33: 4096 — 4111.
[25] HARRIES K A, MCNEICE D S. Performance-based design of high-rise coupled wall systems[J]. The Structural Design of Tall and Special Buildings, 2006, 15(3): 289 — 306.
[26] CSA A23.3-14 Design of concrete structures[S]. Canadian Standards Association(CSA), 2014.
[27] FEMA 445. Next-generation Performance-based Seismic Design Guidelines-program Plan for New and Existing Buildings [S]. Washington DC: Federal Emergency Management Agency, 2006.
[28] QU B, BRUNEAU M. Design of steel plate shear walls considering boundary frame moment resisting action[J]. Journal of Structural Engineering, 2009, 135(12): 1511 — 1521.
[29] 周天华, 李文超, 管宇, 等. 基于应力三轴度的钢框架循环加载损伤分析[J]. 工程力学, 2014, 31(7): 146 — 155.
ZHOU Tianhua, LI Wenchao, GUAN Yu, et al. Damage analysis of steel frames under cyclic load based on stress triaxiality[J]. Engineering Mechanics, 2014, 31(7): 146 — 155.(in Chinese)
[30] HABASHI H R, ALINIA M M. Characteristics of the wall-frame interaction in steel plate shear walls[J]. Journal of Constructional Steel Research, 2010, 66(2): 150 — 158.
[31] WANG M, BORELLO D J, FAHNESTOCK L A. Boundary frame contribution in coupled and uncoupled steel plate shear walls[J]. Earthquake Engineering & Structural Dynamics, 2017, 46(14): 2355 — 2380.
[32] Park R. State of the art report-ductility evaluation from laboratory and analytical testing. 1988.